FMLR200 mini radiator
Small heater / frost guard
For heating and frost protection
The small heaters FML and FMLR are small, compact heaters that emit a lot of heat despite the small dimensions. The attractive design and the small building mass, this series is suitable for heating and frost protection in various areas, such as Houses, apartments, food cellars, in addition to water pumps, pumps in houses, warehouses, greenhouses, and cabinets for electrical connections. The small heaters are equipped with a 1 meter long cord with grounded plug and a built-in thermostat. The thermostat can be adjusted from the frost protection function from + 5 ° C up to + 35 ° C.
The small heaters be mounted using mounting brackets to the wall, which are included. To get in a normal insulated room room temperature, 50-80 W / m² is required. Normally, a much lower performance for the frost protection function is sufficient.
Mounting brackets for easy wall mounting are included. FML (R) must be mounted horizontally, with the control knob on the right side. The small heater should not be installed directly under a wall outlet. The minimum clearances for installation, please refer to FIG. 1.
All models are (1 meter) and a connector equipped with a cable for connection to a grounded wall outlet.
Area of application
The mini radiator / frost guard despite the small size a lot of heat. Compact radiators are suitable for frost protection, but can also for heating of different areas, such as in apartments, are used near water pipes, small shops, greenhouses and electrical cabinets.
Convectors and radiators from Frico produce a pleasant warmth. The heat distribution in the room is good, at the same time counteracts the warm air flow cold drafts from windows.
Operation and economy
The selection of products with different outputs results in energy efficient heating, regardless of whether the whole building needs to be heated, or only frost protection is required. Long life and minimum maintenance costs reduce.
The mini radiator / frost guard is painted white or available in stainless steel, due to its compact size, it is easy to position.
- Horizontal (FML / FMLR) or vertical (FMS) wall mounting.
- A tubular element made of stainless steel.
- With a 1m cable and plug for connection to a grounded outlet.
- Integrated protection against overheating.
- Integrated thermostat with setting range +5 - +35 ° C.
- Color on the front: NCS 1103-Y06R (white).
- FMLR200 is made of stainless steel.
- Easy wall mounting
|Heating Power:||0 - 500 Watt|
|Shipping weight:||2,20 Kg|
|Dimensions (L x H x D) [mm]||298 x 90 x 68|
|Case Color||NCS 1103-Y06R|
|Voltage motors [V]||230|
Technische Änderung und Irrtümer vorbehalten!